Application
STEP 1: Apply PlotStart® pre-plant to tilled or untilled soil or spray as soon as possible after planting to ensure the best results possible. PlotStart® can also be applied over the top on established food plots to enhance growth and nutritional feed value.
STEP 2: Apply PlotStart® at a rate of 2.5 to 5.0 gallons per acre depending on pH and soil test levels. For very acidic conditions opt to use 5.0 gallons per acre if possible. Mix PlotStart® with a sufficient amount of water to ensure even coverage. Generally, a minimum of 5 gallons of water for every 1 gallon of PlotStart is needed depending on the spray equipment used but much heavier rates of water can be applied as well. PlotStart® can be mixed with pure liquid nitrogen solutions and some soil applied herbicides.
Always do a jar test to ensure compatibility before mixing PlotStart® with any other chemical or fertilizer solutions.
DO NOT MIX PLOTSTART® WITH ROUND-UP® or GLYPHOSATE
STEP 3: You are almost done! To maximize food plot production even further, consider applying a follow-up treatment of PlotBoost® by AgriGro® 20 – 30 days after food plots are established. You can even add another shot of PlotStart® at this time if soils are extremely deficient in calcium.
Safety Data Sheet