Warm weather application:

Apply 32 oz. of IndigoLT® per 1000 sq. ft.

Cold weather application:

Apply 48 oz. of IndigoLT® per 1000 sq. ft

Use the least amount of water possible as carrier, but enough to insure good coverage. (3.75  – 6.25 gallon water/1000 sq. ft is recommended).

Apply between batches, after cake removal, before tilling, at least 72 hours prior to bird placement. It is important to give the product a minimum of 72 hours to work before bird placement.

If litter is extremely damp and ammonia ridden, apply 1/2 rate immediately after cake removal, then apply the second half 3-5 days before bird placement.

If litter is mostly dry or there is not enough time for a split application, apply entire amount immediately after cake removal, but no later than 3-5 days before bird placement.

NOTE: IndigoLT® is safe to apply while birds are present during the grow out.

Apply IndigoLT before bird placement on every batch.

VERY IMPORTANT:

There WILL BE a spike in ammonia levels for the first 48 hours after application.  Wait 72 hours after application before bird placement and follow good management practices, including:

• Remove cake from the poultry house after each batch.

• Till the litter after IndigoLT™ is applied. The more times it is tilled, the better the results.

• Preheat the house a minimum of 48 hours before bird placement. Ventilate to bring in fresh air.

• On day of bird placement, ventilate at appropriate rate to insure good air quality.

• The preheat period is vital to allow IndigoLT™ adequate time to eliminate ammonia from the house.

• It is important to prepare the litter bed immediately after bird removal to insure the driest environment possible.

• Inoculate new bedding with IndigoLT™ to insure future results.

4 years.

IndigoLT will cause ammonia levels to spike for the first 48 hours after application. Therefore do not place birds for at least 72 hours after application.

*Non-corrosive to equipment*

*Safe and user friendly to the applicator*