- Remove cake from the poultry house after each batch.
- Till the litter after IndigoLT® is applied. The more times it is tilled, the better the results.
- Preheat the house a minimum of 48 hours before bird placement. Ventilate to bring in fresh air.
- The preheat period is vital to allow IndigoLT® adequate time to eliminate ammonia from the house.
- It is important to prepare the litter bed immediately after bird removal to ensure the driest environment possible.
- Inoculate new bedding with IndigoLT® to ensure future results.
For use in all poultry operations: broiler, breeder, pullet, range house, brooder hub, layer, etc…
Warm weather application:
Apply 32 oz. of IndigoLT® per 1000 sq. ft.
Cold weather application:
Apply 48 oz. of IndigoLT® per 1000 sq. ft
Use the least amount of water possible as carrier, but enough to ensure good coverage. (3.75 – 6.25 gallon water/1000 sq. ft is recommended).
WHEN TO APPLY:
Apply between batches, after cake removal, before tilling, at least 72 hours prior to bird placement. It is important to give the product a minimum of 72 hours to work before bird placement.
If litter is extremely damp and ammonia ridden, apply 1/2 rate immediately after cake removal, then apply the second half 3-5 days before bird placement.
If litter is mostly dry or there is not enough time for a split application, apply entire amount immediately after cake removal, but no later than 3-5 days before bird placement.
NOTE: IndigoLT® is safe to apply while birds are present during the grow out.
HOW OFTEN:
Apply IndigoLT® before bird placement on every batch.
VERY IMPORTANT:
There WILL BE a spike in ammonia levels for the first 48 hours after application. Wait 72 hours after application before bird placement and follow good management practices, including:
- Remove cake from the poultry house after each batch.
- Till the litter after IndigoLT® is applied. The more times it is tilled, the better the results.
- Preheat the house a minimum of 48 hours before bird placement. Ventilate to bring in fresh air.
- On day of bird placement, ventilate at appropriate rate to insure good air quality.
- The preheat period is vital to allow IndigoLT® adequate time to eliminate ammonia from the house.
- It is important to prepare the litter bed immediately after bird removal to insure the driest environment possible.
- Inoculate new bedding with IndigoLT® to insure future results.
CAUTIONS:
IndigoLT® will cause ammonia levels to spike for the first 48 hours after application. Therefore do not place birds for at least 72 hours after application.
*Non-corrosive to equipment*
*Safe and user-friendly to the applicator*